Amount to Words [EXCEL 2007]

[msiyab]

Hi All,

I know there are countless threads about this topic, but I could never find a format suitable for the conversion.

Basically, I want the amount, for example-
1) 2159.83 to be converted as "AED Two Thousand Fifty-Nine & Eighty-Three Fils Only"
2) 2159.00 to be converted as "AED Two Thousand Fifty-Nine Only"
3) 212359.00 to be converted as "AED Two Hundred Twelve Thousand Three Hundred Fifty-Nine Only"

AED = UAE Dirhams
Fils = Cents of UAE :P

Could somebody help me with a code or so for this conversion.


Thanks a lot


https://www.youtube.com/channel/UCnxwq2aGJRbjOo_MO54oaHA (https://www.youtube.com/channel/UCnxwq2aGJRbjOo_MO54oaHA)


https://www.youtube.com/channel/UCnxwq2aGJRbjOo_MO54oaHA (https://www.youtube.com/channel/UCnxwq2aGJRbjOo_MO54oaHA)



https://www.youtube.com/channel/UCnxwq2aGJRbjOo_MO54oaHA (https://www.youtube.com/channel/UCnxwq2aGJRbjOo_MO54oaHA)
https://www.reddit.com/r/windowsxp/comments/pexq9q/comment/k81ybvj/?utm_source=reddit&utm_medium=web2x&context=3 (https://www.reddit.com/r/windowsxp/comments/pexq9q/comment/k81ybvj/?utm_source=reddit&utm_medium=web2x&context=3)
https://www.youtube.com/watch?v=bs-urI_o8jo&lc=UgxYgiEZuS9I3xkjJv54AaABAg (https://www.youtube.com/watch?v=bs-urI_o8jo&lc=UgxYgiEZuS9I3xkjJv54AaABAg)
https://www.youtube.com/watch?v=bs-urI_o8jo&lc=UgyBACXgNY4j_cHgH5J4AaABAg.9oTkVdzfqfm9wlhQrYJP 3M (https://www.youtube.com/watch?v=bs-urI_o8jo&lc=UgyBACXgNY4j_cHgH5J4AaABAg.9oTkVdzfqfm9wlhQrYJP 3M)
ttps://www.youtube.com/watch?v=LP9fz2DCMBE (ttps://www.youtube.com/watch?v=LP9fz2DCMBE)
https://www.youtube.com/watch?v=LP9fz2DCMBE&lc=UgzbPgJUMCztIOQDym14AaABAg (https://www.youtube.com/watch?v=LP9fz2DCMBE&lc=UgzbPgJUMCztIOQDym14AaABAg)
https://www.youtube.com/watch?v=LP9fz2DCMBE&lc=UgzbPgJUMCztIOQDym14AaABAg.9wdo_rWgxSH9wdpcYqrv p8 (https://www.youtube.com/watch?v=LP9fz2DCMBE&lc=UgzbPgJUMCztIOQDym14AaABAg.9wdo_rWgxSH9wdpcYqrv p8)
ttps://www.youtube.com/watch?v=bFxnXH4-L1A (ttps://www.youtube.com/watch?v=bFxnXH4-L1A)
https://www.youtube.com/watch?v=bFxnXH4-L1A&lc=UgxuODisjo6cvom7O-B4AaABAg.9w_AeS3JiK09wdi2XviwLG (https://www.youtube.com/watch?v=bFxnXH4-L1A&lc=UgxuODisjo6cvom7O-B4AaABAg.9w_AeS3JiK09wdi2XviwLG)
https://www.youtube.com/watch?v=bFxnXH4-L1A&lc=UgxBU39bTptFznDC1PJ4AaABAg (https://www.youtube.com/watch?v=bFxnXH4-L1A&lc=UgxBU39bTptFznDC1PJ4AaABAg)
ttps://www.youtube.com/watch?v=GqzeFYWjTxI (ttps://www.youtube.com/watch?v=GqzeFYWjTxI)
https://www.youtube.com/watch?v=GqzeFYWjTxI&lc=UgwJnJDJ5JT8hFvibt14AaABAg (https://www.youtube.com/watch?v=GqzeFYWjTxI&lc=UgwJnJDJ5JT8hFvibt14AaABAg)
https://www.youtube.com/channel/UCnxwq2aGJRbjOo_MO54oaHA (https://www.youtube.com/channel/UCnxwq2aGJRbjOo_MO54oaHA)

[Rick Rothstein]

This is a modification to the code I posted here "Yet Another Number-To-Words Function (Sorry, US Style Only) (http://www.excelfox.com/forum/f22/yet-another-number-words-function-sorry-us-style-only-364/)" where I changed the dollars and cents to output as AED and fils with the word Only at the end and, of course, I changed the function name itself to AEDtext. I removed all the other options so there is only one argument to the function... the number you want to convert to text. Copy/paste the following code into a standard module and then use AEDtext as if it were an Excel worksheet function, meaning if you have a number in A1, you could put this in B1...

=AEDtext(A1)

The AEDtext function can also be called from your own VB code routines if you need to use it that way instead. Here is the code...


Private sNumberText() As String

Public Function AEDtext(NumberIn As Variant) As String
Dim cnt As Long
Dim DecimalPoint As Long
Dim CardinalNumber As Long
Dim CommaAdjuster As Long
Dim TestValue As Long
Dim CurrValue As Currency
Dim CentsString As String
Dim NumberSign As String
Dim WholePart As String
Dim BigWholePart As String
Dim DecimalPart As String
Dim tmp As String
Dim sStyle As String
Dim bUseAnd As Boolean
Dim bUseCheck As Boolean
Dim bUseDollars As Boolean
Dim bUseCheckDollar As Boolean
Dim AND_or_CHECK_or_DOLLAR_or_CHECKDOLLAR As String
'----------------------------------------
' Begin setting conditions for formatting
'----------------------------------------
sStyle = "dollar"
bUseAnd = sStyle = "and"
bUseDollars = sStyle = "dollar"
bUseCheck = (sStyle = "check") Or (sStyle = "dollar")
' bUseCheckDollar = sStyle = "checkdollar"
'----------------------------------------
' Check/create array. If this is the first
' time using this routine, create the text
' strings that will be used.
'----------------------------------------
If Not IsBounded(sNumberText) Then
Call BuildArray(sNumberText)
End If
'----------------------------------------
' Begin validating the number, and breaking
' into constituent parts
'----------------------------------------
NumberIn = Trim$(NumberIn)
If Not IsNumeric(NumberIn) Then
AEDtext = "Error - Number improperly formed"
Exit Function
Else
DecimalPoint = InStr(NumberIn, ".")
If DecimalPoint > 0 Then
DecimalPart = Mid$(NumberIn, DecimalPoint + 1)
WholePart = Left$(NumberIn, DecimalPoint - 1)
Else
DecimalPoint = Len(NumberIn) + 1
WholePart = NumberIn
End If
If InStr(NumberIn, ",,") Or _
InStr(NumberIn, ",.") Or _
InStr(NumberIn, ".,") Or _
InStr(DecimalPart, ",") Then
AEDtext = "Error - Improper use of commas"
Exit Function
ElseIf InStr(NumberIn, ",") Then
CommaAdjuster = 0
WholePart = ""
For cnt = DecimalPoint - 1 To 1 Step -1
If Not Mid$(NumberIn, cnt, 1) Like "[,]" Then
WholePart = Mid$(NumberIn, cnt, 1) & WholePart
Else
CommaAdjuster = CommaAdjuster + 1
If (DecimalPoint - cnt - CommaAdjuster) Mod 3 Then
AEDtext = "Error - Improper use of commas"
Exit Function
End If
End If
Next
End If
End If
If Left$(WholePart, 1) Like "[+-]" Then
NumberSign = IIf(Left$(WholePart, 1) = "-", "Minus ", "Plus ")
WholePart = Mid$(WholePart, 2)
End If
'----------------------------------------
' Begin code to assure decimal portion of
' check value is not inadvertently rounded
'----------------------------------------
If bUseCheck = True Then
CurrValue = CCur(Val("." & DecimalPart))
DecimalPart = Mid$(Format$(CurrValue, "0.00"), 3, 2)
If CurrValue >= 0.995 Then
If WholePart = String$(Len(WholePart), "9") Then
WholePart = "1" & String$(Len(WholePart), "0")
Else
For cnt = Len(WholePart) To 1 Step -1
If Mid$(WholePart, cnt, 1) = "9" Then
Mid$(WholePart, cnt, 1) = "0"
Else
Mid$(WholePart, cnt, 1) = _
CStr(Val(Mid$(WholePart, cnt, 1)) + 1)
Exit For
End If
Next
End If
End If
End If
'----------------------------------------
' Final prep step - this assures number
' within range of formatting code below
'----------------------------------------
If Len(WholePart) > 9 Then
BigWholePart = Left$(WholePart, Len(WholePart) - 9)
WholePart = Right$(WholePart, 9)
End If
If Len(BigWholePart) > 9 Then
AEDtext = "Error - Number too large"
Exit Function
ElseIf Not WholePart Like String$(Len(WholePart), "#") Or _
(Not BigWholePart Like String$(Len(BigWholePart), "#") _
And Len(BigWholePart) > 0) Then
AEDtext = "Error - Number improperly formed"
Exit Function
End If
'----------------------------------------
' Begin creating the output string
'----------------------------------------
' Very Large values
TestValue = Val(BigWholePart)
If TestValue > 999999 Then
CardinalNumber = TestValue \ 1000000
tmp = HundredsTensUnits(CardinalNumber) & "Quadrillion "
TestValue = TestValue - (CardinalNumber * 1000000)
End If
If TestValue > 999 Then
CardinalNumber = TestValue \ 1000
tmp = tmp & HundredsTensUnits(CardinalNumber) & "Trillion "
TestValue = TestValue - (CardinalNumber * 1000)
End If
If TestValue > 0 Then
tmp = tmp & HundredsTensUnits(TestValue) & "Billion "
End If
' Lesser values
TestValue = Val(WholePart)
If TestValue = 0 And BigWholePart = "" Then tmp = "Zero "
If TestValue > 999999 Then
CardinalNumber = TestValue \ 1000000
tmp = tmp & HundredsTensUnits(CardinalNumber) & "Million "
TestValue = TestValue - (CardinalNumber * 1000000)
End If
If TestValue > 999 Then
CardinalNumber = TestValue \ 1000
tmp = tmp & HundredsTensUnits(CardinalNumber) & "Thousand "
TestValue = TestValue - (CardinalNumber * 1000)
End If
If TestValue > 0 Then
If Val(WholePart) < 99 And BigWholePart = "" Then bUseAnd = False
tmp = tmp & HundredsTensUnits(TestValue, bUseAnd)
End If
' If in dollar mode, assure the text is the correct plurality
If bUseDollars = True Then
CentsString = HundredsTensUnits(DecimalPart)
tmp = "AED " & tmp
If Len(CentsString) > 0 Then
tmp = tmp & "& " & CentsString
tmp = tmp & "Fils Only"
Else
tmp = tmp & "Only"
End If
End If
' Done!
AEDtext = NumberSign & tmp
End Function

Private Sub BuildArray(sNumberText() As String)
ReDim sNumberText(0 To 27) As String
sNumberText(0) = "Zero"
sNumberText(1) = "One"
sNumberText(2) = "Two"
sNumberText(3) = "Three"
sNumberText(4) = "Four"
sNumberText(5) = "Five"
sNumberText(6) = "Six"
sNumberText(7) = "Seven"
sNumberText(8) = "Eight"
sNumberText(9) = "Nine"
sNumberText(10) = "Ten"
sNumberText(11) = "Eleven"
sNumberText(12) = "Twelve"
sNumberText(13) = "Thirteen"
sNumberText(14) = "Fourteen"
sNumberText(15) = "Fifteen"
sNumberText(16) = "Sixteen"
sNumberText(17) = "Seventeen"
sNumberText(18) = "Eighteen"
sNumberText(19) = "Nineteen"
sNumberText(20) = "Twenty"
sNumberText(21) = "Thirty"
sNumberText(22) = "Forty"
sNumberText(23) = "Fifty"
sNumberText(24) = "Sixty"
sNumberText(25) = "Seventy"
sNumberText(26) = "Eighty"
sNumberText(27) = "Ninety"
End Sub

Private Function IsBounded(vntArray As Variant) As Boolean
On Error Resume Next
IsBounded = IsNumeric(UBound(vntArray))
End Function

Private Function HundredsTensUnits(ByVal TestValue As Integer, _
Optional bUseAnd As Boolean) As String
Dim CardinalNumber As Integer
If TestValue > 99 Then
CardinalNumber = TestValue \ 100
HundredsTensUnits = sNumberText(CardinalNumber) & " Hundred "
TestValue = TestValue - (CardinalNumber * 100)
End If
If bUseAnd = True Then
HundredsTensUnits = HundredsTensUnits & "and "
End If
If TestValue > 20 Then
CardinalNumber = TestValue \ 10
HundredsTensUnits = HundredsTensUnits & _
sNumberText(CardinalNumber + 18) & " "
TestValue = TestValue - (CardinalNumber * 10)
End If
If TestValue > 0 Then
HundredsTensUnits = HundredsTensUnits & _
sNumberText(TestValue) & " "
End If
End Function


https://www.youtube.com/channel/UCnxwq2aGJRbjOo_MO54oaHA (https://www.youtube.com/channel/UCnxwq2aGJRbjOo_MO54oaHA)
https://eileenslounge.com/viewtopic.php?f=27&t=35521&p=276185#p276185 (https://eileenslounge.com/viewtopic.php?f=27&t=35521&p=276185#p276185)
https://eileenslounge.com/viewtopic.php?p=276185#p276185 (https://eileenslounge.com/viewtopic.php?p=276185#p276185)
https://eileenslounge.com/viewtopic.php?p=276185#p276185 (https://eileenslounge.com/viewtopic.php?p=276185#p276185)
https://eileenslounge.com/viewtopic.php?p=276673#p276673 (https://eileenslounge.com/viewtopic.php?p=276673#p276673)
https://eileenslounge.com/viewtopic.php?p=276751#p276751 (https://eileenslounge.com/viewtopic.php?p=276751#p276751)
https://eileenslounge.com/viewtopic.php?p=276754#p276754 (https://eileenslounge.com/viewtopic.php?p=276754#p276754)
https://eileenslounge.com/viewtopic.php?f=30&t=35100&p=274367#p274367 (https://eileenslounge.com/viewtopic.php?f=30&t=35100&p=274367#p274367)
https://eileenslounge.com/viewtopic.php?p=274368#p274368 (https://eileenslounge.com/viewtopic.php?p=274368#p274368)
https://eileenslounge.com/viewtopic.php?p=274370#p274370 (https://eileenslounge.com/viewtopic.php?p=274370#p274370)
https://eileenslounge.com/viewtopic.php?p=274578#p274578 (https://eileenslounge.com/viewtopic.php?p=274578#p274578)
https://eileenslounge.com/viewtopic.php?p=274577#p274577 (https://eileenslounge.com/viewtopic.php?p=274577#p274577)
https://eileenslounge.com/viewtopic.php?p=274474#p274474 (https://eileenslounge.com/viewtopic.php?p=274474#p274474)
https://eileenslounge.com/viewtopic.php?p=274579#p274579 (https://eileenslounge.com/viewtopic.php?p=274579#p274579)
https://www.excelfox.com/forum/showthread.php/261-Scrolling-Marquee-text-on-Userform?p=864&viewfull=1#post864 (https://www.excelfox.com/forum/showthread.php/261-Scrolling-Marquee-text-on-Userform?p=864&viewfull=1#post864)
https://www.youtube.com/channel/UCnxwq2aGJRbjOo_MO54oaHA (https://www.youtube.com/channel/UCnxwq2aGJRbjOo_MO54oaHA)

[msiyab]

Hi Rick,

Thanks a lot for the code. Finally i got a conversion of my desired format. :D
Is it possible to add a 'hyphen' ( - ) between Eighty-Three, Thirty-Six and so on?

If its a lenghty process then ignore it.

Also, i had a small question. Do i have to manually add the code to all the excel files i work on? Because i tried the "=AEDtext(A1)" in another excel sheet and the formula wasnt working.

Awaiting your reply

[Rick Rothstein]

Thanks a lot for the code. Finally i got a conversion of my desired format. :D

You are quite welcome... I am glad I was able to help you out with that.


Is it possible to add a 'hyphen' ( - ) between Eighty-Three, Thirty-Six and so on?

If its a lenghty process then ignore it.

It turned out to be harder than I thought it would be (the original code is somewhat old and I haven't had to modify it in quite some time now), but I believe this will work correctly for you. Rather than trying to direct you to where I made changes, I am simply posting all the code, even those parts that did not change... just replace what I gave you earlier with the following...


Private sNumberText() As String
Public Function AEDtext(NumberIn As Variant) As String
Dim cnt As Long
Dim DecimalPoint As Long
Dim CardinalNumber As Long
Dim CommaAdjuster As Long
Dim TestValue As Long
Dim CurrValue As Currency
Dim CentsString As String
Dim NumberSign As String
Dim WholePart As String
Dim BigWholePart As String
Dim DecimalPart As String
Dim tmp As String
Dim sStyle As String
Dim bUseAnd As Boolean
Dim bUseCheck As Boolean
Dim bUseDollars As Boolean
Dim bUseCheckDollar As Boolean
Dim AND_or_CHECK_or_DOLLAR_or_CHECKDOLLAR As String
'----------------------------------------
' Begin setting conditions for formatting
'----------------------------------------
sStyle = "dollar"
bUseAnd = sStyle = "and"
bUseDollars = sStyle = "dollar"
bUseCheck = (sStyle = "check") Or (sStyle = "dollar")
' bUseCheckDollar = sStyle = "checkdollar"
'----------------------------------------
' Check/create array. If this is the first
' time using this routine, create the text
' strings that will be used.
'----------------------------------------
If Not IsBounded(sNumberText) Then
Call BuildArray(sNumberText)
End If
'----------------------------------------
' Begin validating the number, and breaking
' into constituent parts
'----------------------------------------
NumberIn = Trim$(NumberIn)
If Not IsNumeric(NumberIn) Then
AEDtext = "Error - Number improperly formed"
Exit Function
Else
DecimalPoint = InStr(NumberIn, ".")
If DecimalPoint > 0 Then
DecimalPart = Mid$(NumberIn, DecimalPoint + 1)
WholePart = Left$(NumberIn, DecimalPoint - 1)
Else
DecimalPoint = Len(NumberIn) + 1
WholePart = NumberIn
End If
If InStr(NumberIn, ",,") Or _
InStr(NumberIn, ",.") Or _
InStr(NumberIn, ".,") Or _
InStr(DecimalPart, ",") Then
AEDtext = "Error - Improper use of commas"
Exit Function
ElseIf InStr(NumberIn, ",") Then
CommaAdjuster = 0
WholePart = ""
For cnt = DecimalPoint - 1 To 1 Step -1
If Not Mid$(NumberIn, cnt, 1) Like "[,]" Then
WholePart = Mid$(NumberIn, cnt, 1) & WholePart
Else
CommaAdjuster = CommaAdjuster + 1
If (DecimalPoint - cnt - CommaAdjuster) Mod 3 Then
AEDtext = "Error - Improper use of commas"
Exit Function
End If
End If
Next
End If
End If
If Left$(WholePart, 1) Like "[+-]" Then
NumberSign = IIf(Left$(WholePart, 1) = "-", "Minus ", "Plus ")
WholePart = Mid$(WholePart, 2)
End If
'----------------------------------------
' Begin code to assure decimal portion of
' check value is not inadvertently rounded
'----------------------------------------
If bUseCheck = True Then
CurrValue = CCur(Val("." & DecimalPart))
DecimalPart = Mid$(Format$(CurrValue, "0.00"), 3, 2)
If CurrValue >= 0.995 Then
If WholePart = String$(Len(WholePart), "9") Then
WholePart = "1" & String$(Len(WholePart), "0")
Else
For cnt = Len(WholePart) To 1 Step -1
If Mid$(WholePart, cnt, 1) = "9" Then
Mid$(WholePart, cnt, 1) = "0"
Else
Mid$(WholePart, cnt, 1) = _
CStr(Val(Mid$(WholePart, cnt, 1)) + 1)
Exit For
End If
Next
End If
End If
End If
'----------------------------------------
' Final prep step - this assures number
' within range of formatting code below
'----------------------------------------
If Len(WholePart) > 9 Then
BigWholePart = Left$(WholePart, Len(WholePart) - 9)
WholePart = Right$(WholePart, 9)
End If
If Len(BigWholePart) > 9 Then
AEDtext = "Error - Number too large"
Exit Function
ElseIf Not WholePart Like String$(Len(WholePart), "#") Or _
(Not BigWholePart Like String$(Len(BigWholePart), "#") _
And Len(BigWholePart) > 0) Then
AEDtext = "Error - Number improperly formed"
Exit Function
End If
'----------------------------------------
' Begin creating the output string
'----------------------------------------
' Very Large values
TestValue = Val(BigWholePart)
If TestValue > 999999 Then
CardinalNumber = TestValue \ 1000000
tmp = HundredsTensUnits(CardinalNumber) & "Quadrillion "
TestValue = TestValue - (CardinalNumber * 1000000)
End If
If TestValue > 999 Then
CardinalNumber = TestValue \ 1000
tmp = tmp & HundredsTensUnits(CardinalNumber) & "Trillion "
TestValue = TestValue - (CardinalNumber * 1000)
End If
If TestValue > 0 Then
tmp = tmp & HundredsTensUnits(TestValue) & "Billion "
End If
' Lesser values
TestValue = Val(WholePart)
If TestValue = 0 And BigWholePart = "" Then tmp = "Zero "
If TestValue > 999999 Then
CardinalNumber = TestValue \ 1000000
tmp = tmp & HundredsTensUnits(CardinalNumber) & "Million "
TestValue = TestValue - (CardinalNumber * 1000000)
End If
If TestValue > 999 Then
CardinalNumber = TestValue \ 1000
tmp = tmp & HundredsTensUnits(CardinalNumber) & "Thousand "
TestValue = TestValue - (CardinalNumber * 1000)
End If
If TestValue > 0 Then
If Val(WholePart) < 99 And BigWholePart = "" Then bUseAnd = False
tmp = tmp & HundredsTensUnits(TestValue, bUseAnd)
End If
' If in dollar mode, assure the text is the correct plurality
If bUseDollars = True Then
CentsString = HundredsTensUnits(DecimalPart)
tmp = "AED " & tmp
If Len(CentsString) > 0 Then
tmp = tmp & "& " & CentsString
tmp = tmp & "Fils Only"
Else
tmp = tmp & "Only"
End If
End If
' Done!
AEDtext = NumberSign & tmp
End Function

Private Sub BuildArray(sNumberText() As String)
ReDim sNumberText(0 To 27) As String
sNumberText(0) = "Zero"
sNumberText(1) = "One"
sNumberText(2) = "Two"
sNumberText(3) = "Three"
sNumberText(4) = "Four"
sNumberText(5) = "Five"
sNumberText(6) = "Six"
sNumberText(7) = "Seven"
sNumberText(8) = "Eight"
sNumberText(9) = "Nine"
sNumberText(10) = "Ten"
sNumberText(11) = "Eleven"
sNumberText(12) = "Twelve"
sNumberText(13) = "Thirteen"
sNumberText(14) = "Fourteen"
sNumberText(15) = "Fifteen"
sNumberText(16) = "Sixteen"
sNumberText(17) = "Seventeen"
sNumberText(18) = "Eighteen"
sNumberText(19) = "Nineteen"
sNumberText(20) = "Twenty"
sNumberText(21) = "Thirty"
sNumberText(22) = "Forty"
sNumberText(23) = "Fifty"
sNumberText(24) = "Sixty"
sNumberText(25) = "Seventy"
sNumberText(26) = "Eighty"
sNumberText(27) = "Ninety"
End Sub

Private Function IsBounded(vntArray As Variant) As Boolean
On Error Resume Next
IsBounded = IsNumeric(UBound(vntArray))
End Function

Private Function HundredsTensUnits(ByVal TestValue As Integer, _
Optional bUseAnd As Boolean) As String
Dim CardinalNumber As Integer
If TestValue > 99 Then
CardinalNumber = TestValue \ 100
HundredsTensUnits = sNumberText(CardinalNumber) & " Hundred "
TestValue = TestValue - (CardinalNumber * 100)
End If
If bUseAnd = True Then
HundredsTensUnits = HundredsTensUnits & "and "
End If
If TestValue > 20 Then
CardinalNumber = TestValue \ 10
HundredsTensUnits = HundredsTensUnits & _
sNumberText(CardinalNumber + 18)
TestValue = TestValue - (CardinalNumber * 10)
End If
If TestValue > 0 Then
If Right(HundredsTensUnits, 1) <> " " Then HundredsTensUnits = HundredsTensUnits & "-"
HundredsTensUnits = HundredsTensUnits & sNumberText(TestValue) & " "
Else
HundredsTensUnits = HundredsTensUnits & " "
End If
If Left(HundredsTensUnits, 1) = "-" Then HundredsTensUnits = Mid(HundredsTensUnits, 2)
End Function



Also, i had a small question. Do i have to manually add the code to all the excel files i work on? Because i tried the "=AEDtext(A1)" in another excel sheet and the formula wasnt working.

If you plan to give your workbook to others or if you plan to use it on more than one computer, then yes, each workbook will need to have the code added to it. On the other hand, if you only need the functionality from one computer, you could put the code in your Personal Workbook and run it from there. Here is a link to creating a Person Workbook if you do not now have one...

How do I create a PERSONAL.XLS(B) or Add-in (http://www.rondebruin.nl/personal.htm)

[msiyab]

OMG!! Thanks a lot Rick!!

Really appreaciate the time you spent on this. Will get to learn a lot from you.:D

https://www.youtube.com/channel/UCnxwq2aGJRbjOo_MO54oaHA (https://www.youtube.com/channel/UCnxwq2aGJRbjOo_MO54oaHA)
https://www.reddit.com/r/windowsxp/comments/pexq9q/comment/k81ybvj/?utm_source=reddit&utm_medium=web2x&context=3 (https://www.reddit.com/r/windowsxp/comments/pexq9q/comment/k81ybvj/?utm_source=reddit&utm_medium=web2x&context=3)
https://www.youtube.com/watch?v=bs-urI_o8jo&lc=UgxYgiEZuS9I3xkjJv54AaABAg (https://www.youtube.com/watch?v=bs-urI_o8jo&lc=UgxYgiEZuS9I3xkjJv54AaABAg)
https://www.youtube.com/watch?v=bs-urI_o8jo&lc=UgyBACXgNY4j_cHgH5J4AaABAg.9oTkVdzfqfm9wlhQrYJP 3M (https://www.youtube.com/watch?v=bs-urI_o8jo&lc=UgyBACXgNY4j_cHgH5J4AaABAg.9oTkVdzfqfm9wlhQrYJP 3M)
ttps://www.youtube.com/watch?v=LP9fz2DCMBE (ttps://www.youtube.com/watch?v=LP9fz2DCMBE)
https://www.youtube.com/watch?v=LP9fz2DCMBE&lc=UgzbPgJUMCztIOQDym14AaABAg (https://www.youtube.com/watch?v=LP9fz2DCMBE&lc=UgzbPgJUMCztIOQDym14AaABAg)
https://www.youtube.com/watch?v=LP9fz2DCMBE&lc=UgzbPgJUMCztIOQDym14AaABAg.9wdo_rWgxSH9wdpcYqrv p8 (https://www.youtube.com/watch?v=LP9fz2DCMBE&lc=UgzbPgJUMCztIOQDym14AaABAg.9wdo_rWgxSH9wdpcYqrv p8)
ttps://www.youtube.com/watch?v=bFxnXH4-L1A (ttps://www.youtube.com/watch?v=bFxnXH4-L1A)
https://www.youtube.com/watch?v=bFxnXH4-L1A&lc=UgxuODisjo6cvom7O-B4AaABAg.9w_AeS3JiK09wdi2XviwLG (https://www.youtube.com/watch?v=bFxnXH4-L1A&lc=UgxuODisjo6cvom7O-B4AaABAg.9w_AeS3JiK09wdi2XviwLG)
https://www.youtube.com/watch?v=bFxnXH4-L1A&lc=UgxBU39bTptFznDC1PJ4AaABAg (https://www.youtube.com/watch?v=bFxnXH4-L1A&lc=UgxBU39bTptFznDC1PJ4AaABAg)
ttps://www.youtube.com/watch?v=GqzeFYWjTxI (ttps://www.youtube.com/watch?v=GqzeFYWjTxI)
https://www.youtube.com/watch?v=GqzeFYWjTxI&lc=UgwJnJDJ5JT8hFvibt14AaABAg (https://www.youtube.com/watch?v=GqzeFYWjTxI&lc=UgwJnJDJ5JT8hFvibt14AaABAg)
https://www.youtube.com/channel/UCnxwq2aGJRbjOo_MO54oaHA (https://www.youtube.com/channel/UCnxwq2aGJRbjOo_MO54oaHA)

[msiyab]

Mr. Rick,

I just got back to work and tried your codes on my work files. I have a small problem.

When i type an amout, for example, 123, the result comes up like "AED One Hundred Twenty-Three & Fils Only"

If there is no number after the decimal point, the Fils Only part should not come. Instead "AED One Hundred Twenty-Three Only" should appear.


If you could only provide the code for the above mentioned problem.


Thanks

[Rick Rothstein]

I just got back to work and tried your codes on my work files. I have a small problem.
When i type an amout, for example, 123, the result comes up like "AED One Hundred Twenty-Three & Fils Only"
If there is no number after the decimal point, the Fils Only part should not come. Instead "AED One Hundred Twenty-Three Only" should appear.

Sorry (that's the problem when you go back and try to modify functioning code to work differently), see if this works the way you expect...


Private sNumberText() As String

Public Function AEDtext(NumberIn As Variant) As String
Dim cnt As Long
Dim DecimalPoint As Long
Dim CardinalNumber As Long
Dim CommaAdjuster As Long
Dim TestValue As Long
Dim CurrValue As Currency
Dim CentsString As String
Dim NumberSign As String
Dim WholePart As String
Dim BigWholePart As String
Dim DecimalPart As String
Dim tmp As String
Dim sStyle As String
Dim bUseAnd As Boolean
Dim bUseCheck As Boolean
Dim bUseDollars As Boolean
Dim bUseCheckDollar As Boolean
Dim AND_or_CHECK_or_DOLLAR_or_CHECKDOLLAR As String
'----------------------------------------
' Begin setting conditions for formatting
'----------------------------------------
sStyle = "dollar"
bUseAnd = sStyle = "and"
bUseDollars = sStyle = "dollar"
bUseCheck = (sStyle = "check") Or (sStyle = "dollar")
' bUseCheckDollar = sStyle = "checkdollar"
'----------------------------------------
' Check/create array. If this is the first
' time using this routine, create the text
' strings that will be used.
'----------------------------------------
If Not IsBounded(sNumberText) Then
Call BuildArray(sNumberText)
End If
'----------------------------------------
' Begin validating the number, and breaking
' into constituent parts
'----------------------------------------
NumberIn = Trim$(NumberIn)
If Not IsNumeric(NumberIn) Then
AEDtext = "Error - Number improperly formed"
Exit Function
Else
DecimalPoint = InStr(NumberIn, ".")
If DecimalPoint > 0 Then
DecimalPart = Mid$(NumberIn, DecimalPoint + 1)
WholePart = Left$(NumberIn, DecimalPoint - 1)
Else
DecimalPoint = Len(NumberIn) + 1
WholePart = NumberIn
End If
If InStr(NumberIn, ",,") Or _
InStr(NumberIn, ",.") Or _
InStr(NumberIn, ".,") Or _
InStr(DecimalPart, ",") Then
AEDtext = "Error - Improper use of commas"
Exit Function
ElseIf InStr(NumberIn, ",") Then
CommaAdjuster = 0
WholePart = ""
For cnt = DecimalPoint - 1 To 1 Step -1
If Not Mid$(NumberIn, cnt, 1) Like "[,]" Then
WholePart = Mid$(NumberIn, cnt, 1) & WholePart
Else
CommaAdjuster = CommaAdjuster + 1
If (DecimalPoint - cnt - CommaAdjuster) Mod 3 Then
AEDtext = "Error - Improper use of commas"
Exit Function
End If
End If
Next
End If
End If
If Left$(WholePart, 1) Like "[+-]" Then
NumberSign = IIf(Left$(WholePart, 1) = "-", "Minus ", "Plus ")
WholePart = Mid$(WholePart, 2)
End If
'----------------------------------------
' Begin code to assure decimal portion of
' check value is not inadvertently rounded
'----------------------------------------
If bUseCheck = True Then
CurrValue = CCur(Val("." & DecimalPart))
DecimalPart = Mid$(Format$(CurrValue, "0.00"), 3, 2)
If CurrValue >= 0.995 Then
If WholePart = String$(Len(WholePart), "9") Then
WholePart = "1" & String$(Len(WholePart), "0")
Else
For cnt = Len(WholePart) To 1 Step -1
If Mid$(WholePart, cnt, 1) = "9" Then
Mid$(WholePart, cnt, 1) = "0"
Else
Mid$(WholePart, cnt, 1) = _
CStr(Val(Mid$(WholePart, cnt, 1)) + 1)
Exit For
End If
Next
End If
End If
End If
'----------------------------------------
' Final prep step - this assures number
' within range of formatting code below
'----------------------------------------
If Len(WholePart) > 9 Then
BigWholePart = Left$(WholePart, Len(WholePart) - 9)
WholePart = Right$(WholePart, 9)
End If
If Len(BigWholePart) > 9 Then
AEDtext = "Error - Number too large"
Exit Function
ElseIf Not WholePart Like String$(Len(WholePart), "#") Or _
(Not BigWholePart Like String$(Len(BigWholePart), "#") _
And Len(BigWholePart) > 0) Then
AEDtext = "Error - Number improperly formed"
Exit Function
End If
'----------------------------------------
' Begin creating the output string
'----------------------------------------
' Very Large values
TestValue = Val(BigWholePart)
If TestValue > 999999 Then
CardinalNumber = TestValue \ 1000000
tmp = HundredsTensUnits(CardinalNumber) & "Quadrillion "
TestValue = TestValue - (CardinalNumber * 1000000)
End If
If TestValue > 999 Then
CardinalNumber = TestValue \ 1000
tmp = tmp & HundredsTensUnits(CardinalNumber) & "Trillion "
TestValue = TestValue - (CardinalNumber * 1000)
End If
If TestValue > 0 Then
tmp = tmp & HundredsTensUnits(TestValue) & "Billion "
End If
' Lesser values
TestValue = Val(WholePart)
If TestValue = 0 And BigWholePart = "" Then tmp = "Zero "
If TestValue > 999999 Then
CardinalNumber = TestValue \ 1000000
tmp = tmp & HundredsTensUnits(CardinalNumber) & "Million "
TestValue = TestValue - (CardinalNumber * 1000000)
End If
If TestValue > 999 Then
CardinalNumber = TestValue \ 1000
tmp = tmp & HundredsTensUnits(CardinalNumber) & "Thousand "
TestValue = TestValue - (CardinalNumber * 1000)
End If
If TestValue > 0 Then
If Val(WholePart) < 99 And BigWholePart = "" Then bUseAnd = False
tmp = tmp & HundredsTensUnits(TestValue, bUseAnd)
End If
' If in dollar mode, assure the text is the correct plurality
If bUseDollars = True Then
CentsString = HundredsTensUnits(DecimalPart)
tmp = "AED " & tmp
If Len(Trim(CentsString)) > 0 Then
tmp = tmp & "& " & CentsString
tmp = tmp & "Fils Only"
Else
tmp = tmp & "Only"
End If
End If
' Done!
AEDtext = NumberSign & tmp
End Function

Private Sub BuildArray(sNumberText() As String)
ReDim sNumberText(0 To 27) As String
sNumberText(0) = "Zero"
sNumberText(1) = "One"
sNumberText(2) = "Two"
sNumberText(3) = "Three"
sNumberText(4) = "Four"
sNumberText(5) = "Five"
sNumberText(6) = "Six"
sNumberText(7) = "Seven"
sNumberText(8) = "Eight"
sNumberText(9) = "Nine"
sNumberText(10) = "Ten"
sNumberText(11) = "Eleven"
sNumberText(12) = "Twelve"
sNumberText(13) = "Thirteen"
sNumberText(14) = "Fourteen"
sNumberText(15) = "Fifteen"
sNumberText(16) = "Sixteen"
sNumberText(17) = "Seventeen"
sNumberText(18) = "Eighteen"
sNumberText(19) = "Nineteen"
sNumberText(20) = "Twenty"
sNumberText(21) = "Thirty"
sNumberText(22) = "Forty"
sNumberText(23) = "Fifty"
sNumberText(24) = "Sixty"
sNumberText(25) = "Seventy"
sNumberText(26) = "Eighty"
sNumberText(27) = "Ninety"
End Sub

Private Function IsBounded(vntArray As Variant) As Boolean
On Error Resume Next
IsBounded = IsNumeric(UBound(vntArray))
End Function

Private Function HundredsTensUnits(ByVal TestValue As Integer, _
Optional bUseAnd As Boolean) As String
Dim CardinalNumber As Integer
If TestValue > 99 Then
CardinalNumber = TestValue \ 100
HundredsTensUnits = sNumberText(CardinalNumber) & " Hundred "
TestValue = TestValue - (CardinalNumber * 100)
End If
If bUseAnd = True Then
HundredsTensUnits = HundredsTensUnits & "and "
End If
If TestValue > 20 Then
CardinalNumber = TestValue \ 10
HundredsTensUnits = HundredsTensUnits & _
sNumberText(CardinalNumber + 18)
TestValue = TestValue - (CardinalNumber * 10)
End If
If TestValue > 0 Then
If Right(HundredsTensUnits, 1) <> " " Then HundredsTensUnits = HundredsTensUnits & "-"
HundredsTensUnits = HundredsTensUnits & sNumberText(TestValue) & " "
Else
HundredsTensUnits = HundredsTensUnits & " "
End If
If Left(HundredsTensUnits, 1) = "-" Then HundredsTensUnits = Mid(HundredsTensUnits, 2)
End Function

[msiyab]

Thanks a ton, Rick. Really appreciate it.

Sorry for being such a pain in the arse and asking you soooooo many things.