Appendix Thread. App Index Rws() Clms() Majic code line Codings for other Threads, Tables etc.)

**DocAElstein** · 09-16-2015, 03:25 PM

For more recent posts on the App Index Rws() Clms() idea, see from approximately page 50
https://www.excelfox.com/forum/showt...s-etc-)/page50
, and the best, most recent will be from about page 53
https://www.excelfox.com/forum/showt...s-etc-)/page53

Other posts before this may be subject to change and testing experiments

This thread will become the main Blog thread for posts on the App Index Rws() Clms() idea

Re: Appendix Thread. ( Codes for other Threads, HTML Tables, etc. )

Hi
. I would like to use this Thread as an Appendix for codes in other Threads so as to help reduce clutter in that Thread should the code be a bit long, or not directly relevant.
. Also as HTML code is on in this Test Sub Forum I would like to reference HTML Tables should I wish to use them in answering threads

@ Moderators, Administrator:
. I hope the above is OK to do and if so please do not delete this Thread. ( Or advise if I should post my "Appendix" somewhere else ( If possible where HTML code is on ) )
.
. Many Thanks
Alan

This thread 2837
https://excelfox.com/forum/showthrea...ds-Tables-etc-)

This Post #post19050 https://excelfox.com/forum/showthrea...ll=1#post19050
https://excelfox.com/forum/showthrea...tc-)#post19050

(Copied from 2834)

https://www.youtube.com/channel/UCnxwq2aGJRbjOo_MO54oaHA

https://www.youtube.com/watch?v=yVgLmj0aojI&lc=UgwWg8x2WxLSxxGsUP14AaABAg.9k3ShckGnhv9k89Lsaig oO
https://www.youtube.com/watch?v=yVgLmj0aojI&lc=UgxxxIaK1pY8nNvx6JF4AaABAg.9k-vfnj3ivI9k8B2r_uRa2
https://www.youtube.com/watch?v=yVgLmj0aojI&lc=UgxKFXBNd6Pwvcp4Bsd4AaABAg
https://www.youtube.com/watch?v=yVgLmj0aojI&lc=Ugw9X6QS09LuZdZpBHJ4AaABAg

**DocAElstein** · 06-08-2016, 02:24 PM

Function Code for getting Column Letter from Column Number
Shortened version used in Post #14
http://www.excelfox.com/forum/showth...=9837#post9837
Public Function CL(ByVal lclm As Long) As String

And Fuller version with explaining ‘Comments

Code:

Public Function CL(ByVal lclm As Long) As String '         http://www.excelforum.com/development-testing-forum/1101544-thread-post-appendix-no-reply-needed-please-do-not-delete-thanks-4.html#post4213980
    Do: Let CL = Chr(65 + (((lclm - 1) Mod 26))) & CL: Let lclm = (lclm - (1)) \ 26: Loop While lclm > 0
End Function

Function FukOutChrWithDoWhile(ByVal lclm As Long) As String 'Using chr function and Do while loop      For example http://www.excelforum.com/excel-programming-vba-macros/796472-how-to-go-from-column-number-to-column-letter.html
Dim rest As Long 'Variable for what is "left over" after subtracting as many full 26's as possible
    Do
    '    Let rest = ((lclm - 1) Mod 26) 'Gives 0 to 25 for Column Number "Left over" 1 to 26. Better than ( lclm Mod 26 ) which gives 1 to 25 for clm 1 to 25 then 0 for 26
    '    Let FukOutChrWithDoWhile = Chr(65 + rest) & FukOutChrWithDoWhile 'Convert rest to Chr Number, initially with full number so the "units" (0-25), then number of 26's left over (if the number was so big to give any amount of 26's in it, then number of 26's in the 26's left over (if the number was so big to give any amount of 26 x 26's in it, Enit ?
    '    'OR
    Let FukOutChrWithDoWhile = Chr(65 + (((lclm - 1) Mod 26))) & FukOutChrWithDoWhile
    Let lclm = (lclm - (1)) \ 26 'This gives the number of 26's ( if any ), but just the excact part, in the next number down , - so applying the rest formula to this new number will again leave a difference "left over" rest.
    'lclm = (lclm - (rest + 1)) \ 26 ' As the number is effectively truncated here, any number from 1 to (rest +1)  will do in the formula
    Loop While lclm > 0 'Only loop further if number was big enough to still have 0-25's in it
End Function
Rem Ref    http://www.excelforum.com/development-testing-forum/1101544-thread-post-appendix-no-reply-needed-please-do-not-delete-thanks-4.html#post4213980
Rem Ref    http://www.excelforum.com/tips-and-tutorials/1108643-vba-column-letter-from-column-number-explained.html

**DocAElstein** · 06-08-2016, 11:12 PM

**DocAElstein** · 06-08-2016, 11:42 PM

**DocAElstein** · 06-26-2016, 10:27 PM

**DocAElstein** · 10-23-2016, 02:19 PM

Referrences in suppost of this post:
http://www.excelfox.com/forum/showth...=9985#post9985

and solution to this post
http://www.excelforum.com/excel-prog...ml#post4507157

' http://www.snb-vba.eu/VBA_Arraylist_en.html
' http://www.snb-vba.eu/VBA_Arraylist_en.html#L_11.3

' https://usefulgyaan.wordpress.com/20...1/#comment-587

' https://usefulgyaan.wordpress.com/20...1/#comment-515

Code:

'   https://usefulgyaan.wordpress.com/2013/06/12/vba-trick-of-the-week-slicing-an-array-without-loop-application-index/comment-page-1/#comment-587
Sub M_snbSortof()  '   http://www.snb-vba.eu/VBA_Arraylist_en.html#L_11.3
Dim rngVoll As Range: Set rngVoll = Tabelle3.Range("A1:E10")
Dim snAll() As Variant, Sported() As Variant
 Let snAll() = rngVoll.Value
Dim j As Long, jj As Long
    With CreateObject("System.Collections.Arraylist")
        For j = 1 To UBound(snAll(), 1)
         .Add snAll(j, 3)
        Next
     .Sort
     Let Sported() = .ToArray
     .Clear
        For j = 0 To UBound(Sported())
            For jj = 1 To UBound(snAll(), 1)
                If snAll(jj, 3) = Sported(j) Then
                ' Use Range to overcome  Array size Limits of Worksheets Functions
                'Dim Clm As Range: Set Clm = Application.Index(rngVoll, jj, 0)
                ' .Add Clm.Value
                ' .Add (Application.Index(rngVoll, jj, 0).Value)
                
                ' Use Cells to overcome  Array size Limits of Worksheets Functions
                Dim LB As Long, UB As Long '…User Given start and Stop Column as a Number
                 Let LB = LBound(snAll(), 2): Let UB = UBound(snAll(), 2)
                Dim strLtrLB As String, strLtrUB As String '…Column Letter corresponding to Column Number
                'There are many ways to get a Column Letter from a Column Number – excelforum.com/tips-and-tutorials/1108643-vba-column-letter-from-column-number-explained.html
                 Let strLtrLB = Split(Cells(1, LB).Address, "$")(1) 'An Address Method
                 Let strLtrUB = Replace (Replace(Cells(1, UB).Address, "1", ""), "$", "") 'A Replace Method
                'Obtain Column Indicies using Spreadsheet Function Column via VBA Evaluate Method
                Dim clms() As Variant
                 Let clms() = Evaluate("column(" & strLtrLB & ":" & strLtrUB & ")") 'Returns 1 D “pseudo” Horizontal Array of sequential numbers from column number of LB to UB
                'Or
                 clms() = Evaluate("column(" & Split(Cells(1, LB).Address, "$")(1) & ":" & Replace (Replace(Cells(1, UB).Address, "1", ""), "$", "") & ")")
                .Add (Application.Index(Tabelle3.Cells, jj, clms()))
                 
                 'Let snAll(jj, 3) = ""
                Exit For
                End If
            Next jj
        Next j
        For j = 0 To .Count - 1
         Tabelle3.Cells(j + 1 + 10, 1).Resize(, UBound(snAll, 2)) = .Item(j)
        Next j
    End With
End Sub
'
Sub M_snb()
Dim sn, sp, j As Long, jj As Long
sn = Tabelle3.Range("A1:E10")
    With CreateObject("System.Collections.Arraylist")
        For j = 1 To UBound(sn)
        .Add sn(j, 3)
        Next
     .Sort
     sp = .ToArray
     .Clear
        For j = 0 To UBound(sp)
            For jj = 1 To UBound(sn)
                If sn(jj, 3) = sp(j) Then
                 .Add Application.Index(sn, jj)
                 sn(jj, 3) = ""
                Exit For
                End If
            Next
        Next
        For j = 0 To .Count - 1
         Tabelle3.Cells((j + 1) + 10, 1).Resize(, UBound(sn, 2)) = .Item(j)
        Next
    End With
End Sub































'Rem Ref
'    http://www.excelforum.com/excel-programming-vba-macros/1139207-how-to-move-a-userform-and-module-from-one-book-to-another-2.html
'    http://www.excelforum.com/excel-programming-vba-macros/1138300-vba-userform-value-check-if-user-form-buttons-checked-not-working-check-button-on-open.html
'    http://www.excelforum.com/excel-programming-vba-macros/1139742-workbooks_open-crashes-when-file-opened-with-code-manually-open-ok-userform-issue.html
'    http://www.excelfox.com/forum/showthread.php/2130-Sort-an-array-based-on-another-array-VBA?p=9985#post9985
'    http://www.snb-vba.eu/VBA_Arraylist_en.html
'    http://www.snb-vba.eu/VBA_Arraylist_en.html#L_11.3
'    http://www.excelforum.com/showthread.php?t=1154829&page=4#post4502593
'    http://www.excelforum.com/excel-programming-vba-macros/1160648-how-to-create-a-pop-up-notification-for-two-different-conditions-at-the-same-time.html#post4507157
'    http://www.excelfox.com/forum/showthread.php/2130-Sort-an-array-based-on-another-array-VBA?p=9985#post9985

**DocAElstein** · 01-30-2017, 04:58 AM

**DocAElstein** · 02-03-2017, 07:13 PM

Code for Nelson in this Thread
http://www.excelfox.com/forum/showth...liday-overtime
http://www.excelfox.com/forum/showth...0060#post10060

Code:

Option Explicit
Sub IJAdjustTotalAllWorksheet()     '  http://www.excelfox.com/forum/showth...0060#post10060
Rem 1) Workbooks Info.
Dim Wb As Workbook                  ' Dim: For Object variabls: Address location to a "pointer". That has all the actual memory locations (addresses) of the various property values , and it holds all the instructions what / how to change them , should that be wanted later. That helped explain what occurs when passing an Object to a Call ed Fucntion or Sub Routine By Val ue. In such an occurance, VBA actually  passes a copy of the pointer.  So that has the effect of when you change things like properties on the local variable , then the changes are reflected in changes in the original object. (The copy pointer instructs how to change those values, at the actual address held in that pointer). That would normally be the sort of thing you would expect from passing by Ref erence.  But as that copy pointer "dies" after the called routine ends, then any changes to the Addresses of the Object Properties in the local variable will not be reflected in the original pointer. So you cannot actually change the pointer.)
 Set Wb = ActiveWorkbook            ' Set: Fill or partially Fill: Setting to a Class will involve the use of an extra New at this code line. I will then have an Object referred to as an instance of a Class. At this point I include information on my Pointer Pigeon hole for a distinct distinguishable usage of an Object of the Class. For the case of something such as a Workbook this instancing has already been done, and in addition some values are filled in specific memory locations which are also held as part of the information in the Pigeon Hole Pointer. We will have a different Pointer for each instance. In most excel versions we already have a few instances of Worksheets. Such instances Objects can be further used., - For this a Dim to the class will be necessary, but the New must be omitted at Set. I can assign as many variables that I wish to the same existing instance
Dim wsStear As Worksheet            ' Used for each Worksheet counting Tabs from left from 1 To Total
Rem 2) varables for some totals ;)
Const TDays As Long = 30            'Total days just taken as 30            ' Long is very simple to handle, - final memory "size" type is known (123.456 and 000.001 have same "size" computer memory ) , and so a Address suggestion can be given for the next line when the variable is filled in.  '( Long is a Big whole Number limit (-2,147,483,648 to 2,147,483,647) If you need some sort of validation the value should only be within the range of a Byte/Integer otherwise there's no point using anything but Long.--upon/after 32-bit, Integers (Short) need converted internally anyways, so a Long is actually faster. )
Dim NOHrsV2 As Double, HOHrsV2 As Double                                    ' I am proposing to use the underlying number an adjust as necerssary to get the reqired format
Dim Dte As Date, DteNo As Long                                              ' I am hoping Dte will sort out getting a date in a format that I can use the Weekday function to see what week day it is and get that as a nuumber to check for..
Rem 3) Loop through worksheets and give some Totals
Dim Cnt As Long ' Loop Bound variable count for going through all worksheets
'3a) main Loop start=====================================================
    For Cnt = 1 To Wb.Worksheets.Count                                      ' The Worksheets collection Object Property returns the number of worksheet items in the Workbook
     Let NOHrsV2 = 0: Let HOHrsV2 = 0                                       ' The varaibles are emtied before run for each worksheet
     Set wsStear = Wb.Worksheets.Item(Cnt)                                  ' At each loop the variable is set to the current Worksheet counting from the Cnt'ths tab from left
    Dim lr As Long                                                          ' Used for last row number in column E
     Let lr = wsStear.Range("E" & Rows.Count & "").End(xlUp).Row            ' The Range Object ( cell ) that is the last cell in the column of interest (CHOOSE a column typically that will always have a last Entry in any Data) ,( Row Number given by .Count Property applied to ( any Worksheet would do, so leaving unqualified is OK here, ) Spreadsheet Range Rows Property)    has the Property .End ( argument "Looking back up" ) appled to it. This Returns a new Range ( cell ) object which is that of the first Range ( cell ) with something in it "looking back up" in the XL spreadsheet from that last Cell. Then the .Row Property is applied to return a long number equal to the Row number of that cell:     Rows.Count is the very last row number in your Worksheet. It is different for earlier versions of Excel.  The End(xlUp) is the same as pressing a Ctrl+UpArrow key combination. The final ".Row" returns the row where the cursor stops after moving up.
    Dim FstDtaCel As Range: Set FstDtaCel = wsStear.Range("A1")             ' Worksheets Range(" ") Property used to return Range object of first cell in second row
'3b) Data arrays from worksheet. We need columns E H I J      ....   Date ( Column E ) and Total hrs ( Column H ) are required to use in calculations
    Dim arrDte() As Variant, arrTotHrs() As Variant                         ' In the next lines the .Value2 or .value Property is applied a Range object which presents the Value or Value2 value or values in a single variable of appropriate type or a field of member Elements of varaint types.We are expecting the latter, so declare ( Dim ) a dynamic Array variable appropriately. It must be dynamic as its size will be defined at that assignment
     Let arrDte() = FstDtaCel.Offset(0, 4).Resize(lr, 1).Value    '  E      ' One thing you pick up when learning VBA programming is that referring to cells from one to another via an offset is both fundamental and efficient. That makes sense as Excel is all about using the offsets mentioned above. So like if you use them you can “cut out the middle man”. ( The middle man here might be considered as, for example, in VBA, using extra variables for different Range objects: A fundamental thing to do with any cell ( or strictly speaking the Range object associated to a cell ) is the Range Item Property of any range Object, through which you can “get at” any other Range object. http://www.excelforum.com/showthread...t=#post4563838 ( It is often quicker than using a separate variable for each Range object – probably as all the variable does is hold the offset , so you might as well use the offset in the first place.. )
     Let arrTotHrs() = FstDtaCel.Offset(0, 7).Resize(lr, 1).Value '  H      ' Similarly Another thing you pick up along the way is that the cells ( or strictly speaking the Range objects associated with it ) can be organised into groups of cells which then are also called Range objects and are organised in their constituent parts exactly the same as for the single cell Range object. Once again this is all an indication of organising so that we get at information by sliding along a specific amount ( offset value). The Offset and Resize properties therefore return a new range object. I use the .Value 2 here as i seemed to get it for .Value anyway, not sure why yet, - so i thought be on the safe side , get it always and work somehow with that for now and convert as necerssary.   Also 1 breadth Arrays due to Alan Intercept theory are held in such a ways as to be very effient in usage of values within:
    
    Dim arrInNorm() As Variant, arrInOver() As Variant
     Let arrInNorm() = FstDtaCel.Offset(0, 8).Resize(lr, 1).Value2 ' I      ' Normal Hrs ( Column I ) are needed as they must be set to zero for Holy ?? Holidays ?? Friday ??
     Let arrInOver() = FstDtaCel.Offset(0, 9).Resize(lr, 1).Value2 ' J      ' Overtime ( Column J ) is needed as it will be changed and then used in calculations
'3c) Inner loop for rows
    Dim ShtCnt As Long ' Loop Bound Variable Count for hours columns looping
        For ShtCnt = 1 To UBound(arrDte(), 1) Step 1 '------------------- For "rows" in data arrays
'3d) We need to check for a Holy?? Holiday?? Friday??    Adjust columns I and J so that column I has no hours for holiday day and total hours goes to over time hours with criteria 9 or less than 9 hrs all total hours added overtime, 10 or above 10 hrs one hour deducted from total hours and added to column J
         Let Dte = arrDte(ShtCnt, 1): Let DteNo = Weekday(Dte, [vbSunday])  ' I do not really nead this extra variable, but for dates I prefer always to do this to help in looking into the variable in Debugging
            If DteNo = 6 Then ' 6 I think is Friday, Nelson's Holy HoliDay ?
                If (arrTotHrs(ShtCnt, 1) * 24) <= 9 Then                    '(i) If  Total Hrs are less than or equal to 9 ,Then all  Total Hrs are added to Overtime Hrs
                 Let arrInOver(ShtCnt, 1) = arrTotHrs(ShtCnt, 1)            ' Given To ' Added to arrInOver(ShtCnt, 1) + arrTotHrs(ShtCnt, 1)
                ElseIf (arrTotHrs(ShtCnt, 1) * 24) > 9 Then                 ' (ii) If  Total Hrs are less greater than 9 , Then (  Total Hrs - 1 )  are added to Overtime Hrs
                 Let arrInOver(ShtCnt, 1) = arrTotHrs(ShtCnt, 1) - 1 / 24   ' Given To      ' arrInOver(ShtCnt, 1) + arrTotHrs(ShtCnt, 1) - 1 / 24 'Added to  1 hr less overtime for more than 9 hrs worked
                End If
             Let arrInNorm(ShtCnt, 1) = Empty                               ' (iii) As array is variant type can empty     Remove normal Hrs  Array for(Column I) is then set tom zerow for this "row"o
            Else ' No Holy Holiday
            End If
'3e)
            If arrInNorm(ShtCnt, 1) <> 0 And arrInOver(ShtCnt, 1) <> 0 Then Let NOHrsV2 = NOHrsV2 + arrInOver(ShtCnt, 1) ' Normal Overtime is simply calculated from summing hours in column J  only If there are Overtime hours in column J And there are  Normal hours are in column I.
            If arrInNorm(ShtCnt, 1) = Empty And arrInOver(ShtCnt, 1) <> 0 Then Let HOHrsV2 = HOHrsV2 + arrInOver(ShtCnt, 1) ' Holiday  Overtime is simply calculated from summing hours in column J  only If there are Overtime hours in column J And there are  no Normal hours are in column I.
        Next ShtCnt '--------------------------End Inner loop for rows-----
'3f) Paste out final Totals and days to current Worksheet
     Let wsStear.Range("G34").Value = NOHrsV2 * 24 'Normal Overtime is held in Array as fraction of a day
     Let wsStear.Range("J34").Value = HOHrsV2 * 24 'Holiday Overtime is held in Array as fraction of a day
     Let wsStear.Range("C34").Value = TDays ' The constant value of Total days is simply added to cell C34
'3g) Normal   Hrs  ( Column I ) and Overtime Hrs ( Column J ) are  changed
     Let FstDtaCel.Offset(0, 9).Resize(lr, 1).Value2 = arrInOver() ' J       ' The required spreadsheet cells range has its Range Object .Value2 values filled an allowed direct assignment to an array of values
     Let FstDtaCel.Offset(0, 8).Resize(lr, 1).Value2 = arrInNorm() ' I
    Next Cnt '==End main Loop==============================================
End Sub


' Rem Ref '_-   http://www.excelfox.com/forum/showth...0062#post10062
'_-             http://www.excelfox.com/forum/showth...0012#post10012